Learning Outcomes

Course Introduction

Sources and Types of Wastewater

Pollutants in Wastewater

Need for Wastewater Management

Issues and Challenges

Lesson Summary

In this module, learning expectations and the basics of wastewater management, including terms, definitions and distinctions are discussed.

Wastewater Generation and Quantity Estimation

Quantity Estimation of Sewage

Population Forecasting Methods

Quantity Estimation of Sewage Flow

Practice Problems

In this module, you will learn how wastewater is generated, estimating quantities and how this data is used to design sewerage systems.

Quality Parameters and Standards I

Quality Parameters and Standards II

Quality Parameters and Standards III

Quality Parameters and Standards IV

In this module, learn about the parameters used to measure the quality of wastewater.

Discharge in Rivers

Purification in Rivers

Oxygen Variations in Water

Natural Purification

Engineered Treatment and Mass Balance

In this module, the fate and transport of contaminants discharged in rivers or streams and how they can be monitored.

Mass Balance Application

Mass Balance in Reactors

Municipal Wastewater Treatment

Wastewater Treatment Units

Grit Removal and Equalization

Primary Sedimentation

Sedimentation Basin Design and Settling Model

In this module, cases and conditions of mass balance and reactors and steps involved in preliminary and primary treatments of wastewater.

Biological Treatments

Microbial Growth

Kinetics of Growth

Activated Sludge Process

ASP Elements

In this module, secondary treatments; principles and processes involved in the use of microorganisms in sewage treatment plants, to remove organic matter.

Introduction

Anaerobic Degradation

Anaerobic Degradation Characteristics

Anaerobic Sludge Blanket Reactor (UASB)

Bio-gas Production

In this module, anaerobic processes in wastewater treatment, including types of microorganisms and how they function in anaerobic reactors.

Introduction to Sludge Management

Sludge Features

Sludge Treatment

Stabilization and Conditioning

Sludge Management

In this module, learn about sludge management processes; processing,  thickening, stabilization, conditioning, dewatering and hygienisation.

Adavanced Treatment of Wastewater

Nutrient Removal

Adsorption and Ion Exchange

Membrane Processes

Disinfection and Chemical Treatment

In this module, tertiary or advanced treatments of wastewater, including nitrification-denitrification, adsorption, membrane processes and chemical treatment solutions.

Alternative and Conventional Approaches

Integrated Systems: Wetlands

SBR and SBBR

MBR and MBBR

In this module, learn about alternative wastewater treatment processes that are becoming more popular due to their inherent advantages.

Reuse and Recycling

Reuse-Recycle Opportunities

Potentialities and Requirements

Regulatory Guidelines

Centralized and Decentralized Recycling

In this module, learn about trends in wastewater recycling and reuse,  including risks, challenges and global practices.

Risks, Challenges and Research Trends

Decision-Making

Public Acceptance

Global Practices and Case Studies

Course Summary I

Course Summary II

In this module, learn about the risks and challenges in wastewater recycling, including technology selection, decision making and public acceptance.

Advanced Diploma in Wastewater Treatment and Recycling - Assessment

In this course, you will learn how wastewater can be treated using different reclamation techniques.

Advanced Diploma in Wastewater Treatment and Recycling

This free online course examines water treatment technologies and their applications, such as producing usable water from wastewater. The course covers the theories and principles involved in wastewater treatment. Topics include wastewater treatment units, treatment systems and processes, re-use criteria and recycling. This course will be of interest to those studying engineering or environmental-related subjects.

This comprehensive online diploma, delivered through instructor-led, video-based modules, offers a deep and practical exploration of the principles, theories, and technologies essential for modern wastewater treatment and recycling. It is designed to equip students, professionals, and policymakers with the knowledge to manage water resources sustainably.The course begins with an Introduction to Wastewater, setting the stage for technical study. You will then master the fundamentals of quantification in Wastewater Generation and Characteristics, learning methods for sewage flow estimation and accounting for factors like population forecasting. This ensures all subsequent treatment planning is based on accurate, manageable inputs.We then address the quality of the water. Quality Parameters introduces the key physical, chemical, and biological metrics used to define wastewater standards. You will study the impact of discharge in rivers, mechanisms of natural purification, and the crucial concept of oxygen variations using principles of mass balance to track pollutant movement.Next, you'll cover the initial phases in Preliminary and Primary Treatments, focusing on units like screens, grit removal, and primary sedimentation, with emphasis on sedimentation basin design. This sets the stage for the core biological methods explored in Secondary Treatments. We then delve into the highly efficient Anaerobic Process, which covers anaerobic degradation, the use of reactors like UASB, and the potential for bio-gas production.A dedicated module on Sludge Management addresses the challenging issue of solids handling, detailing sludge features, treatment methods, and techniques for stabilization and conditioning, which is a major logistical and financial aspect of plant operation.The course advances to specialized processes with Tertiary (Advanced) Treatment Processes for meeting stringent standards. The final modules transition to strategic implementation. Wastewater Recycling covers the principles of reuse and recycling, explores various opportunities, outlines regulatory guidelines, and compares centralized and decentralized recycling systems. Finally, Technology Selection and Decision Making synthesizes the course, teaching you to evaluate systems based on risks, challenges, and research trends, while factoring in non-technical elements like public acceptance using global practices and case studies.

CreativeLive is Live Again: CourseHorse Acquires Platform 15 Days Before Shutdown

Udacity’s 2021: Year in Review

11 Best ChatGPT & Prompt Engineering Courses for 2025

[2025] Massive List of Thousands of Free Certificates and Badges

7 Best Kubernetes Courses for 2025

Layoffs Hit Udemy: 20% Out as Some Jobs Move Overseas

6 Best Site Reliability Engineering Courses to Take in 2025

Best CSS Layout Courses for 2025

Coursera Growth Stalls, Leadership Changes as Stock Hits All-Time Low

8 Best Ecology Courses for 2025: How Species and Systems Interact

10 Best Go (Golang) Courses for 2025

Duolingo Q1 2026: Toward 100M DAUs with Record Engagement and Slower Paid Growth

2U/edX Implements Another Round of Layoffs Amid Ongoing Financial Struggles

The Business of Online Education: A Deep Dive Into Thinkific’s Financials

25 Resources to Learn Generative Engine Optimization in 2025

Duolingo Acqui-hires Music Gaming Studio NextBeat for $34.5 Million

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.